Intel SG-81 IDE Devices None, IDE HDD Auto-Detection, IDE Channel 1/2 Master/Slave/ IDE DriveAuto

Page 29

BIOS Setup	3-5

IDE Devices (None)

Your computer has two IDE channels (Primary and Secondary) and each channel can be installed with one or two devices (Master and Slave). Use these items to configure each device on the IDE channel.

This motherboard features two SATA connectors supporting two SATA drives. SATA refers to Serial ATA (Advanced Technology Attachment), the standard interface for the IDE hard drives which are currently used in most PCs.

Press <Enter> to display the IDE submenu:

IDE HDD Auto-Detection

Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically detect and configure an IDE device on the IDE channel.

NOTE: If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. Choose the line that lists LBA for an LBA drive.

IDE Channel 1/2 Master/Slave/ IDE Drive(Auto)

Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below.

User’s Manual

Image 29

Contents SG-80 Series Page Table of Contents Appendix A. How to Get Technical Support Chapter Driver InstallationFeatures & Specifications Back Panel I/O Model Chipset FeaturesMiscellaneous Product ListLayout Diagram SG-80 Layout Diagram SG-81 Connectors Description Jumpers & Connectors DescriptionJumpers Description Default Setting SG-80 Series CPU Socket Hardware SetupTotal System Memory System MemoryDimm Module Total Memory ATX Power Connectors ATXPOWER, ATX12V Connectors, Headers, and SwitchesFAN Connectors CPUFAN, SYSFAN, Pwrfan Cmos Memory Clearing Header Ccmos Pin 2-3 shorted default Normal operationPin Definition Front Panel Switches & Indicators Connection Headers PANEL1Additional USB Port Connection Header USB3, USB4 Pin Signal Name FunctionFront Panel Audio Connection Header FPIO-AUDIO1 Accelerated Graphics Port Slot AGP1 Internal Audio Source Connectors CD1, AUX1 Floppy Disk Drive Connector FDC IDE Disk Drive Connectors IDE1, IDE2 Serial ATA connectors SATA1, SATA2 External I/O Panel Standard Configuration About the Setup UtilityExits the current menu Updating the Bios Date and Time Using BiosStandard Cmos Features IDE Channel 1/2 Master/Slave/ IDE DriveAuto IDE Devices NoneIDE HDD Auto-Detection Floppy 3 Mode Support Disabled Access Mode AutoDrive A/Drive B 1.44M, 3.5 in./None Video EGA/VGACPU Feature Advanced Bios FeaturesHard Disk Boot Priority Hyper-Threading Technology Enabled CPU L3 Cache EnabledQuick Power On Self Test Enabled First/Second/Third Boot Device Floppy/Hard Disk/CDROMATA 66/100 IDE Cable Msg. Enabled Advanced Chipset FeaturesSecurity Option Setup Small LogoEPA ShowDram Timing Control Dram Clock/Timing ControlDram CAS Latency RAS Active Time tRASGraphic Window WR Combin Enabled RAS to CAS Delay tRCDAGP Fast Write Support Disabled AGP & P2P Bridge ControlVideo RAM Cacheable Disabled System Bios Cacheable DisabledOnChip AGP Control AGP Data Rate AutoOnChip IDE Device Integrated PeripheralsIDE Burst Mode Enabled IDE DMA Transfer Access EnabledOnChip Sata Controller Enabled Serial ATA Mode IDEOnChip AC97 Controller Enabled OnChip USB Controller EnabledOnChip LAN Controller Enabled LAN Boot ROM DisabledParallel Port Mode ECP Onboard FDC Controller EnabledOnboard SuperIO Device Onboard Serial Port 1 3F8/IRQ4ECP Mode Use DMA Power Management SetupOnboard 1394 Device Enabled Init Display First PCI SlotPower On by PS2 Keyboard Hot Key Resume by USB from S3 DisabledPower On by PS2 Mouse Disabled Wakeup By Ring DisabledResources Controlled By AutoESCD PnP/PCI ConfigurationsIRQ Resources PCI/VGA Palette Snoop DisabledSystem Component Characteristics CPU Shutdown Temperature DisabledPC Health Status PIRQ0 Use IRQ No. ~ PIRQ7 Use IRQ No. AutoAuto Detect DIMM/PCI Clk Enabled Load Fail-Safe Defaults OptionSpread Spectrum Enabled Frequency ControlSet Password Load Optimized Defaults OptionExit Without Saving Save & Exit Setup OptionSG-80 Series Driver Installation Drivers Setup ItemsManual Utility Browse CDUser’s Manual How to Get Technical SupportSG-80 Series Appendix aJan van Riebeeckweg 15, 5928LG, Venlo Technical Support Form