Intel SG-81, SG-80 Internal PCI/IDE Both, IDE DMA Transfer Access Enabled, IDE Burst Mode Enabled

Page 39

BIOS Setup

3-15

 

 

 

 

Internal PCI/IDE (Both)

Use these items to enable or disable the internal PCI IDE channels that are integrated on the mainboard.

IDE DMA Transfer Access (Enabled)

This item allows you to enabled the transfer access of the IDE DMA.

IDE Burst Mode (Enabled)

This option, when enabled will instruct the system to send every write transaction to the write buffer. Burstable transactions then burst onto the PCI bus and nonburstable transactions do not.

OnChip SATA Controller (Enabled)

Enables or disables the onboard Serial ATA controller. Enable this item if you are to install SATA devices onboard.

Serial ATA Mode (IDE)

Use this item to define the onboard SATA mode. Set this item to RAID if you are to activate the RAID function of the SATA devices.

Press <Esc> to return to the Integrated Peripherals screen.

User’s Manual

Image 39
Contents SG-80 Series Page Table of Contents Appendix A. How to Get Technical Support Chapter Driver InstallationFeatures & Specifications Product List Model Chipset FeaturesBack Panel I/O MiscellaneousLayout Diagram SG-80 Layout Diagram SG-81 Jumpers & Connectors Description Jumpers Description Default SettingConnectors Description SG-80 Series CPU Socket Hardware SetupSystem Memory Dimm Module Total MemoryTotal System Memory ATX Power Connectors ATXPOWER, ATX12V Connectors, Headers, and SwitchesFAN Connectors CPUFAN, SYSFAN, Pwrfan Cmos Memory Clearing Header Ccmos Pin 2-3 shorted default Normal operationPin Definition Front Panel Switches & Indicators Connection Headers PANEL1Additional USB Port Connection Header USB3, USB4 Pin Signal Name FunctionFront Panel Audio Connection Header FPIO-AUDIO1 Accelerated Graphics Port Slot AGP1 Internal Audio Source Connectors CD1, AUX1 Floppy Disk Drive Connector FDC IDE Disk Drive Connectors IDE1, IDE2 Serial ATA connectors SATA1, SATA2 External I/O Panel Standard Configuration About the Setup UtilityExits the current menu Updating the Bios Using Bios Standard Cmos FeaturesDate and Time IDE Devices None IDE HDD Auto-DetectionIDE Channel 1/2 Master/Slave/ IDE DriveAuto Video EGA/VGA Access Mode AutoFloppy 3 Mode Support Disabled Drive A/Drive B 1.44M, 3.5 in./NoneCPU Feature Advanced Bios FeaturesHard Disk Boot Priority First/Second/Third Boot Device Floppy/Hard Disk/CDROM CPU L3 Cache EnabledHyper-Threading Technology Enabled Quick Power On Self Test EnabledSmall LogoEPA Show Advanced Chipset FeaturesATA 66/100 IDE Cable Msg. Enabled Security Option SetupRAS Active Time tRAS Dram Clock/Timing ControlDram Timing Control Dram CAS LatencyAGP & P2P Bridge Control RAS to CAS Delay tRCDGraphic Window WR Combin Enabled AGP Fast Write Support DisabledAGP Data Rate Auto System Bios Cacheable DisabledVideo RAM Cacheable Disabled OnChip AGP ControlOnChip IDE Device Integrated PeripheralsSerial ATA Mode IDE IDE DMA Transfer Access EnabledIDE Burst Mode Enabled OnChip Sata Controller EnabledLAN Boot ROM Disabled OnChip USB Controller EnabledOnChip AC97 Controller Enabled OnChip LAN Controller EnabledOnboard Serial Port 1 3F8/IRQ4 Onboard FDC Controller EnabledParallel Port Mode ECP Onboard SuperIO DeviceInit Display First PCI Slot Power Management SetupECP Mode Use DMA Onboard 1394 Device EnabledWakeup By Ring Disabled Resume by USB from S3 DisabledPower On by PS2 Keyboard Hot Key Power On by PS2 Mouse DisabledResources Controlled By AutoESCD PnP/PCI ConfigurationsIRQ Resources PCI/VGA Palette Snoop DisabledPIRQ0 Use IRQ No. ~ PIRQ7 Use IRQ No. Auto CPU Shutdown Temperature DisabledSystem Component Characteristics PC Health StatusFrequency Control Load Fail-Safe Defaults OptionAuto Detect DIMM/PCI Clk Enabled Spread Spectrum EnabledSet Password Load Optimized Defaults OptionExit Without Saving Save & Exit Setup OptionSG-80 Series Driver Installation Browse CD Setup ItemsDrivers Manual UtilityUser’s Manual How to Get Technical SupportSG-80 Series Appendix aJan van Riebeeckweg 15, 5928LG, Venlo Technical Support Form