Intel I815E user manual J16 USB and Primary RJ45 Connectors, J17 Smart Card Reader Interface

INSTALLATIONS

J16: USB and Primary RJ45 Connectors

J16 consists of the primary RJ-45 connector (top) and two stacked USB ports. Refer to the section below for their respective pin assignments.

USB1

USB2

Pin #	Signal Name
1	Vcc
2	USB-
3	USB+
4	Ground

J17: Smart Card Reader Interface

J17 is a 14-pin header that provides interface for a Smart Card Reader. The table below shows the pin assignments of this pin header.

Signal Name		Pin #		Pin #	Signal Name
Vcc	1		2		No connect
-SCRFET	3		4		SCRRST
SCRCLK	5		6		SCRIO
Ground	7		8		-SCRPRES

J18: +5V Standby Connector

J18 is the +5V standby 2-pin connector. Refer to the pin assignments below.

22 I815E User’s Manual