Intel Detailed Specifications and Features of 815E Chipset

	INTRODUCTION
Specifications
Processor	Socket 370 for Intel Celeron / Pentium III (FC-PGA),
Supported	533MHz~1.4GHz, 66/100/133MHz Bus Speed
Chipset	Intel 815E Chipset
	GMCH: 82815 544-PIN BGA
	ICH2: 82801BA 360-PIN BGA
	FWH
BIOS	Award BIOS; supports ACPI
System Memory	1x DIMM socket supports up to 256MB capacity
	PC100/PC133 DIMM modules supported
LPC I/O Chipset	ITE IT8712 (keyboard controller is built-in)
I/O Features	1x FDD (up to 2.88MB, 3 Mode, LS120)
	1x Parallel Port (EPP, ECP Port)
	2x Serial Ports (1x RS232 and 1x RS232/422/485)
	1x IrDA TX/RX Headers
Bus Master IDE	2x IDE interfaces for up to 4 devices; supports PIO Mode
	3/4 or UDMA33/66/100 HDD, and ATAPI CD-ROM
VGA	815E integrated graphics
	Shared memory
	4MB display cache on board
	VGA CRT connector on board
	Pin header for optional TV-Out (CH7007) daughter board
	with S-Video & RCA jacks
Audio	ICH2 integrated audio with AC97 codec
LAN	ICH2 integrated Ethernet controller
	10Base-T / 100Base-TX protocol
	Primary RJ-45 Ethernet connector on board
Secondary LAN	Optional Intel 82559 Ethernet controller
(Optional)	10Base-T / 100Base-TX protocol
	Optional Secondary RJ-45 Ethernet connector on board
USB	Two USB ports on board
	Another two USB ports supported by USB pin header
IrDA	Pin header
Hardware	Built-in IT8712
Monitoring	Monitors CPU/system temperature and voltages
Watchdog Timer	256-level Watchdog timer
P/S Connector	ATX type power supply connector
Rear Side	PS/2 keyboard, PS/2 mouse, Primary RJ45 connector;
Connectors	optional secondary RJ-45 connector, printer port, VGA
	CRT, USBx2, serial Port, Microphone, speaker
Form Factor	5.25-inch SBC (Little Board)
Dimensions	203mm x 146mm (7.99” x 5.75”)

I815E User’s Manual 3