English
9)SATAII0/SATAII1/SATAII2/SATAII3 (SATA 3Gb/s Connector)
SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA II and install the proper driver in order to work properly.
| 1 |
|
|
| 7 |
|
| Pin No. | Definition | ||
|
|
|
|
|
|
|
|
|
| 1 | GND |
|
|
|
|
|
|
|
|
|
| 2 | TXP |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| 3 | TXN |
|
|
|
|
|
|
|
|
|
| 4 | GND |
| 7 |
|
|
| 1 |
|
|
| |||
|
|
|
|
|
|
| 5 | RXN | |||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| 6 | RXP |
|
|
|
|
|
|
|
|
|
| 7 | GND |
10)F_AUDIO (Front Audio Connector)
This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish
to use the front audio function, connect the front panel audio module to this connector. Check the pin assignments carefully while you connect the front panel audio module. Incorrect connection between the module and connector will make the audio device unable to work or even damage it. For optional front panel audio module, please contact your chassis manufacturer.
| 1 | 2 |
| 9 | 10 |
HD Audio: |
|
|
Pin No. | Definition | |
1 | MIC2_L | |
2 | GND |
|
3 | MIC2_R | |
4 | ||
5 | Line2_R | |
6 | FSENSE1 | |
7 | FAUDIO_JD | |
8 | No Pin |
|
9 | LINE2_L | |
10 | FSENSE2 | |
AC'97 Audio:
Pin No. | Definition | |
1 | MIC |
|
2 | GND |
|
3 | MIC Power |
|
4 | NC |
|
5 | Line Out (R) |
|
6 | NC |
|
7 | NC |
|
8 | No Pin |
|
9 | Line Out (L) |
|
10 | NC |
|
By default, the audio driver is configured to support HD Audio. To connect an AC97 front panel audio module to this connector, please refer to the instructions on Page 78 about the software settings.
- 22 - |