Intel GA-8I945P-G Onboard H/W GigaRAID, GigaRAID Function, Onboard H/W LAN, Keyless Port

English

Onboard H/W 1394

Enabled	Enable onboard IEEE 1394 function.(Default value)
Disabled	Disable this function.

Onboard H/W GigaRAID

Enabled	Enable Onboard H/W GigaRAID function. (Default value)
Disabled	Disable this function.

GigaRAID Function

RAID	Select onboard GigaRAID chip function as RAID. (Default value)
ATA	Select onboard GigaRAID chip function asa ATA.

Onboard H/W LAN

Enabled	Enable Onboard H/W LAN function. (Default value)
Disabled	Disable this function.

Onboard LAN Boot ROM

This function decide whether to invoke the boot ROM of the onboard LAN chip.

Enabled	Enable this function.
Disabled	Disable this function. (Default value)

Onboard Serial Port 1

Auto	BIOS will automatically setup the port 1 address.
3F8/IRQ4	Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3	Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4	Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3	Enable onboard Serial port 1 and address is 2E8/IRQ3.

G-Keyless Port

Enabled	Enable G-Keyless port function. (Default value)
Disabled	Disable this function.

Onboard Parallel port

Disabled	Disable onboard LPT port.
378/IRQ7	Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5	Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7	Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP	Using Parallel port as Standard Parallel Port. (Default value)
EPP	Using Parallel port as Enhanced Parallel Port.
ECP	Using Parallel port as Extended Capabilities Port.
ECP+EPP	Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

3	Set ECP Mode Use DMA to 3. (Default value)
1	Set ECP Mode Use DMA to 1.

Only for GA-8I945P Pro.

GA-8I945P (Pro)(-G) Motherboard - 38 -