Intel GA-8I945P PRO Sata RAID / Ahci Mode, On-Chip Sata Mode, Pata IDE Set to, USB Controller

Page 37

SATA RAID / AHCI Mode

RAID

Set the onboard SATA controller to RAID mode. (Default value)

AHCI

Set the onboard SATA controller to AHCI mode. Advanced Host

 

Controller Interface (AHCI) is an interface specification that allows the

 

storage driver to enable advanced Serial ATA features such as Native

 

Command Queuing and hot plug. For more details about AHCI, please

 

visit Intel's website.

Disabled

Set the onboard SATA controller to IDE mode.

On-Chip SATA Mode

Disabled

Disable this function.

Auto

BIOS will auto detect. (Default value)

Combined

Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on

 

the motherboard; 2 for SATA and the other for PATA IDE.

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6

 

HDDs to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to

 

PATA mode.

PATA IDE Set to

Ch.1

Master/Slave

Set PATA IDE to Ch. 1 Master/Slave. (Default value)

Ch.0

Master/Slave

Set PATA IDE to Ch. 0 Master/Slave.

SATA Port 0/2 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave,this function will auto set to Ch. 0 Master/Slave.

SATA Port 1/3 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.

USB Controller

Enabled

Enable USB Controller. (Default value)

Disabled

Disable USB Controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled

Enable USB 2.0 Controller. (Default value)

Disabled

Disable USB 2.0 Controller.

USB Keyboard Support

Enabled

Enable USB Keyboard Support.

Disabled

Disable USB Keyboard Support. (Default value)

USB Mouse Support

Enabled

Enable USB Mouse Support.

Disabled

Disable USB Mouse Support. (Default value)

Azalia Codec

Auto

Auto detect Azalia audio function. (Default value)

 

Disabled

Disable Azalia audio function.

 

Only for GA-8I945P Pro.

 

 

 

 

 

 

- 37 -

BIOS Setup

English

Image 37
Contents GA-8I945P Pro GA-8I945P-G Motherboard Product Manual Classification CopyrightTable of Contents Only for GA-8I945P Pro Unique Software UtilitiesOptional Accessories Only for GA-8I945P Pro. Only for GA-8I945P-G 8I945P Pro-GLGA775 CPUCLK+/-133/200/266MHz 33MHz 14.318MHz 100MHz 5789 48MHz Dual Bios100MHz Host Interface Intel IDE1 ChannelsInstallation Notices Considerations Prior to InstallationInstances of Non-Warranty Hardware InstallationSupports Intel Pentium D / Pentium 4 LGA775 CPUNote Feature SummarySupports 1066/800/533MHz FSB Š L2 cache varies with CPUHigh Definition Audio Supports 2 / 4 / 6 / 8 channel audio Onboard AudioRear Speaker Out Center/Subwoofer Speaker Out Side Speaker Out connectionInstallation of the CPU Installation of the CPU and HeatsinkInstallation of the Heatsink Installation of Memory Installing/Removing Cool-Plus Northbridge Cooling FanOnly for GA-8I945P Pro GA-8I945P Pro-G Motherboard Dual Channel Memory Configuration Installation of Expansion Cards I/O Back Panel Introduction Center/Subwoofer Speaker Out Connectors IntroductionSide Speaker Out ATX12V/ATX Power Connector Nbfan Chip Fan Connector 5 Cpufan / Sysfan / Pwrfan Cooler Fan Power ConnectorIDE1/IDE2/IDE3 IDE Connector FDD Floppy ConnectorFaudio Front Audio Connector SATAII0/SATAII1/SATAII2/SATAII3 Sata 3Gb/s ConnectorFpanel Front Panel Jumper Pwrled OptionalCdin CD Connect CD-ROM or DVD-ROM audio out to the connectorSpdifi Spdif 16 F11394/F21394 Ieee 1394 Connector USB/GREENUSB Front USB ConnectorF21394 F11394CI Chassis Intrusion, Case Open RfidClrcmos Clear Cmos BATBatteryEnglish Main Menu Status Page Setup Menu / Option Page Setup MenuMain Menu For example Bios Ver. GA-8I945P Pro F2a „ Set Supervisor Password „ Load Optimized Defaults„ Set User Password „ Save & Exit SetupIDE Channel 0 Master, Slave TimeDetection step and allow for faster system start up Drive a / Drive B Floppy 3 Mode Support for Japan AreaHalt on MemoryFirst / Second / Third Boot Device Hard Disk Boot PriorityPassword Check Limit Cpuid Max. to CPU Hyper-ThreadingNo-Execute Memory Protect Note CPU Enhanced Halt C1E NoteOn-Chip Primary PCI IDE Integrated PeripheralsOn-Chip Secondary PCI IDE On-Chip Sata Mode Sata RAID / Ahci ModePata IDE Set to Sata Port 0/2 Set toParallel Port Mode Onboard LAN Boot ROMECP Mode Use DMA Onboard H/WPower On By Mouse Resume by AlarmDisabled Disable this function. Default value Enabled If Resume by Alarm is EnabledKB Power on Password Power On By KeyboardBefore AC-power off AC Back FunctionOnly for GA-8I945P Pro Bios Setup PnP/PCI ConfigurationsCurrent CPU/POWER /SYSTEM FAN Speed RPM Current CPU TemperatureCPU Warning Temperature Case OpenedCPU Smart FAN Control CPU Smart FAN ModeM Note CPU Clock Ratio NoteRobust Graphics Booster A.2CPU Host Frequency Mhz CPU Host Clock ControlPCI Experss Frequency Mhz System Memory MultiplierFSB OverVoltage Control PCI-E OverVoltage ControlCPU Voltage Control Normal CPU VcoreSelect Language Load Fail-Safe DefaultsSet Supervisor/User Password Load Optimized DefaultsExit Without Saving Save & Exit SetupEnglish Install Chipset Drivers Install DriversDriver CD Information Software ApplicationsContact Us Hardware InformationThis page lists all device you have for this motherboard Please see the last page for detailsEnglish Unique Software Utilities User Interface Overview EasyTune 5 IntroductionHow to use the Xpress Recovery2 Xpress Recovery2 IntroductionSystem requirements Precautions Main Screen of Xpress Recovery2Limitations What is Dual Bios Technology ? Flash Bios Method IntroductionHow to use Dual Bios and Q-Flash Utility? Dual Bios / Q-Flash Programming UtilityHalt On Error DisableDefault, Enable Boot From Main BIOSDefault, Backup BiosBefore You Begin Method 1 Q-FlashTMUtilityTask menu for Dual Bios utility Exploring the Q-FlashTM / Dual Bios utility screenEntering the Q-FlashTMutility Task menu for Q-Flash utilitySteps Using the Q-FlashTMutilityYou can repeat to Part Two Press Y on your keyboard to load defaultsEnglish Exploring the Q-FlashTMutility screenBios file becomes F4 after updating Congratulation!! You have updated Bios successfully@BIOS Utility Method 2 @BIOSTM UtilityMethods and steps English RAID Levels Serial ATA Bios Setting Utility IntroductionDISK/VOLUME Information Configuring the Intel RAID BiosPress Enter under Create RAID Volume to set up RAID Create RAID VolumeName RAIDVolume0 Press Enter under the Create Volume item Delete RAID Volume Cd bootdrv Menu Installing the RAID drivers5 2- / 4- / 6- / 8- Channel Audio Function Introduction Stereo Speakers Connection and SettingsStep After installation of the audio driver, you should find Channel Audio SetupEnglish Sound Effect Configuration AMI Bios Beep Codes TroubleshootingEnglish English English English English Taiwan Headquarters Contact UsChina Shanghai