English
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto | Set Robust Graphics Booster to Auto. (Default value) |
Fast | Set Robust Graphics Booster to Fast. |
Turbo | Set Robust Graphics Booster to Turbo. |
C.I.A.2
C.I.A.2 (CPU Intelligent Acelerator 2) is designed to detect CPU loading during software program executing, and automatically adjust CPU computing power to maximize system performance.
Disabled | Disable this function. (Default value) |
Cruise | Set C.I.A.2 to Cruise. (Automatically increase CPU frequency(5%,7%) by |
| CPU loading. |
Sports | Set C.I.A.2 to Sports. (Automatically increase CPU frequency(7%,9%) by |
| CPU loading. |
Racing | Set C.I.A.2 to Racing. (Automatically increase CPU frequency(9%,11%) by |
| CPU loading. |
Turbo | Set C.I.A.2 to Turbo. (Automatically increase CPU frequency(15%,17%) by |
| CPU loading. |
Full Thrust | Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%, 19%) |
by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs. for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled | Disable CPU Host Clock Control. (Default value) |
Enabled | Enable CPU Host Clock Control. |
CPU Host Frequency (Mhz)
100MHz ~ 600MHz Set CPU Host Frequency from 100MHz to 600MHz.
If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.If you use FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power
PCI Experss Frequency (Mhz)
Auto | Set PCI Express frequency automatically. (Default value) |
100~130 | Set PCI Express frequency from 100MHz to 130MHz. |
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue. for FSB(Front Side Bus) frequency=533MHz,
2.5 | Memory Frequency = Host clock X 2.5 |
3 | Memory Frequency = Host clock X 3. |
4 | Memory Frequency = Host clock X 4. |
Auto | Set Memory frequency by DRAM SPD data. (Default value) |
- 44 - |