Intel 845GV, 845GL user manual Standard Cmos Features, Advanced Bios Features

Page 24

Setup BIOS provides function, for example virus, boot-strap induct

¾Advanced Chipset Features

Setup main board chipset parameter’ for example DRAM Timing

¾Integrated Peripherals

Setup include main board all peripherals drive

¾Power Management Setup

Setup CPU, Hard disk, Monitor drive power save mode

¾PnP/PCI Configurations

Setup PnP and PCI interface parameter

¾PC Health Status

Setup CPU/System temperature and FANs/Voltage Measurements

¾Frequency/Voltage Control

Setup CPU frequency/Voltage in system

¾Load Fail-Safe Defaults

Setup the best performance values in system

¾Set Supervisor Password

Setup supervisor password in system

¾Set User Password

Setup user password in system

¾Save & Exit Setup

Setup save and exit, press Y to save and exit

¾Exit Without Save Setup

Setup without save and exit, press N to without save and exit

6.2Standard CMOS Features

¾Date (mm:dd:yyyy)

These items set up system date

¾Time (hh:mm:ss)

These items set up system time

¾Pri/Sec Master/Slave

These items configure device connected to the Primary and Secondary IDE channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting fails to find a hard disk drive, set it to User, and then fill in the hard disk characteristics manually. If you have a CD-ROM drive, select the setting CD- ROM. If you have an ATAPI device with removable media, select Fl optical.

6.3Advanced BIOS Features

¾CPU L1&L2 Cache

Leave these items enabled since all the processors that can be installed on this board have internal L2 cache memory.

¾First Boot Device

When system boot-strap first time detect device.

¾Second/Third Boot Device

When system boot-strap first time detect device.

Image 24
Contents Package CONTENTS………………….………………… INSTALLATION…………………………….………………Bios SETUP………………………………………………… INTRODUCTION……………………….…………………Package Contents Key Features -ChipsetIntroduction ProcessorBios Supports USB Ports Six USB portsIDE Port PortsMain board Locations JP3 Clear Cmos Jumper Setting Audio Front panel Jumper settingUSB Expansion Connector Expansion SlotsConnectors CPU InstallationFunction Port Pane1 Page Memory installation IDE Devices InstallationOther Device Installation Floppy Disk Drive Installation Sound Connector Port InstallationATX Power connectors 20-pin ATXPWRI, 4-pin ATX Wake on LAN WOLDriver Installation Installation Directory Intel Chipset Software SetupClick Next to continue Select YES to continue Page Page Select Next to continue Select Next to Continue Select Finish to complete the installation Windows 98se driver setup Channel Sound Output SupportPage Select Reinstall Driver to continue Select Next to continue Page Select Next to continue Select Next to Continue Select Next to Continue Page Bios Setup Main menuStandard Cmos Features Advanced Bios FeaturesAdvanced Chipset Features Integrated PeripheralsPower Management Setup PnP/PCI ConfigurationsLoad Fail-Safe Defaults Load Optimized DefaultsChange Password Save Exit & Without Save Exit Setup