Intel Celeron M Half Size CPU Card With VGA/LAN System FAN Connector, Clear Cmos Data Selection

Chapter 2 Hardware Configuration

2-19. SYSTEM FAN CONNECTOR

JSFAN1 : System Fan connector

The pin assignment is as follows:

PIN ASSIGNMENT

1GND

2+12V

3FAN0

2-20. CLEAR CMOS DATA SELECTION

JP10 : Clear CMOS Data Selection

The selections are as follows :

FUNCTION	JUMPER SETTING
	(pin closed)
Clear CMOS	2-3
Normal	1-2

1

JSFAN1

JUMPER

ILLUSTRATION

*** Manufacturing Default is set as Normal.

Note: To clear CMOS data, user must power-off the computer and set the jumper to “Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal” and power-on the computer.

Page: 2-14 PCI-471LF USER′S MANUAL