Monitoring Battery Backup
Multiple utilities are available to display and configure BBU information including recharge count. When you replace a BBU, you should reset this counter to zero. Intel recommends that you replace the BBU once per year or after 500 recharge cycles, whichever comes first.
Note: This chapter describes only the
Monitoring BBUs with the RAID BIOS Configuration Utility
The Intel® RAID BIOS Console configures disk arrays and logical drives. It is independent of the operating system and accessed at server start up by pressing <Cntrl> <G>
To view the BBU information, follow these steps:
1.At boot, press <Cntrl><G> when prompted.
2.In the RAID BIOS Console, choose “Adapter Properties” on the main menu.
3.Click Next to view the second Adapter Properties screen.
4.In the Battery Backup field at the top left of the screen, click the word “Present”.
Figure 5. Battery monitoring with the RAID BIOS Utility
7