Intel M570TU manual Removing the Hard Disk Drive, HDD Assembly Removal

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.

Hard Disk Upgrade Process

1.Turn off the computer, and turn it over and remove the battery (page 2 - 6).

2.Locate the component bay cover and remove screws 1 - 11 .

3.Remove the bay cover 12 .

4.The hard disk assembly will be visible at point 13 on the mainboard.

Disassembly

Figure 2

HDD Assembly

Removal

a. Remove the screws.

b.Remove the cover and lo- cate the HDD.

a.				b.
1	2	3	4
9	10	11		12
			5	13
	8	7		
				12. Component Bay

6 Cover

• 11 Screws

2.Disassembly

Removing the Hard Disk Drive 2 - 7