Connections

Connecting to a DVD player

DVD Player

AUDIO OUT

Green

Blue

Red

Illustration of AV-32D503

1)Connect Green cable out from DVD player “Y” Component Output, in to TV “Y” Component Input.

2)Connect Blue cable out from DVD player “PB” Component Output, in to TV “PB” Component Input.

3)Connect Red cable out from DVD Player “PR” Component Output, in to TV “PR” Component Input.

4)Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.

5)Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.

Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please consult the user’s manual for your DVD Player for more information.

Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or Audio Output) before starting the other to avoid accidentally switching the cables.

See page 22 for instructions on programming your remote control to operate the basic func- tions of your DVD player.

If you use Input 2 (Component-In) for the DVD connection, you must set the

V2 COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD sig- nal.

NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work prop- erly with this television.

16

Page 16
Image 16
JVC AV 27D503, AV-36D503, AV-36D303, AV-36D203, AV-32D503, AV-32D303, AV-32D203, AV-27D503 manual Connecting to a DVD player