Intel D510MO manual Legacy Input/Output I/O Controller, LAN Subsystem

Intel Desktop Board D510MO Product Guide

Legacy Input/Output (I/O) Controller

The legacy I/O controller provides the following:

•Two serial ports (via onboard headers)

•One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support via an onboard headers

•Serial IRQ interface compatible with serialized IRQ support for PCI systems

•PS/2-style keyboard and mouse ports

•Intelligent power management, including a programmable wake up event interface

•PCI power management support

The BIOS Setup program provides configuration options for the legacy I/O controller.

LAN Subsystem

The LAN subsystem consists of the following:

•Intel NM10 Express Chipset

•Realtek 8111DL Gigabit Ethernet Controller for 10/100/1000 Mbits/s Ethernet LAN connectivity

•RJ-45 LAN connector with integrated status LEDs

Additional features of the LAN subsystem include:

•CSMA/CD protocol engine

•LAN connect interface that supports the ethernet controller

•PCI bus power management

⎯Supports ACPI technology

⎯Supports LAN wake capabilities

LAN drivers are available from Intel’s World Wide Web site at

http://downloadcenter.intel.com/.

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 3). These LEDs indicate the operating states of the LAN.

Figure 3. LAN Status LEDs

16