ViewSonic WMG120, WMG80 manual LAN Primary Setup

LAN (Primary Setup)

IP Address: The default is Gateway IP Setting. No change is necessary.

Subnet Mask: The default is Gateway IP Setting. No change is necessary.

Wireless (Primary Setup)

Mode: click the down arrow field for the drop-down menu with a list of wireless networking modes. Select one of the following modes based on your environment setting:

•11b+g: If you have 802.11b and 802.11g devices in your network, then keep the default setting, 11b+g.

•11g Only: Default for optimal performance. If you have 802.11g devices, select 11g Only. This will give you the best wireless performance.

Channel: change as needed (recommended) especially if you experience interference with other wireless routers in the vicinity.

SSID: the default “viewsonic” is automatically entered. No change is necessary.

Security: select one.

Disable > click Apply > press Logout to close the screen.

Enable > click Configure Security. The Wireless LAN Configuration screen appears as shown on the next page. Security Mode defaults to WEP.

Wireless LAN Configuration

screen shown on the next page.

ViewSonic Wireless Media Gateway 17