ViewSonic NMP-530 manual Management, Startup URLS/NETWORK Configuration

MANAGEMENT

STARTUP URLS/NETWORK CONFIGURATION

E	The Network Configuration screen allows you to select the video that appears on-screen when you
N

Gboot up the NMP-530. To go to the Network Configuration screen after logging into the NMP-530,

Lunder Management click Startup. The Startup URLs screen and the Network Configuration

Iscreen appears as shown below. Failover Video and Failover Browser - the URL entered on these

S	fields will be enabled if the main Video and Browser Startup URL's failed to play.
H
		Displays the IP address
			Displays the Video source
				Displays the Browser

1To play a particular video at startup, in the Video field, enter a valid HTML page. Here are some examples:

•http://<ip-address->/<mpeg-1/2-file-located on WEB Server>

•udp://<ip-multicast-address>/port

•rtp://<multicast-address>/port

•iptv://<ip-multicast-address>/videoport/audioport

•playlist=http://<ip-address>/<playlist-file-located-on-WEB-server>

2.In the Browser field, enter a startup web screen (for example, http://www.viewsonic.com). Note: The MAC address is a read-only field that displays the built-in MAC address of the unit.

Continued . . .

12 ViewSonic NMP-530