3.In the DHCP field of the Network Configuration screen, tap the down arrow for the pull- down menu and select Enabled to dynamically get network parameters. Make sure there are values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to these fields automatically. If you select Disabled, type valid network parameters in these fields.
4.If any changes were made to this screen, do the following:
•To enable the changes, click Apply
•To save the changes, under Administration click Save Configuration > click Save.
BROWSER CONFIGURATION
The Browser Configuration screen allows you to make specific screen settings for a specific URL that you chose. under Management click Browser. The screen shown below appears. Note: 1 millisecond = 1/1000th second.
1.In the Macromedia Flash Transparency Source field, select one of the options from the
2.In the Screen rotation angle (clockwise) field, select one from the
Continued . . .
E N G L I S H
ViewSonic | 13 |