Nikon SBV5121 manual Setting Up a USB Driver in Windows

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows 2000

1Insert the SBV5121 VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.

2Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 8. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed:

3Click Next. The following window is displayed:

Although your VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

Be sure “Search for a suitable driver for my device” is selected.

SBV5121 VoIP Cable Modem User Guide 15