► Channel 1 Master
Use this submenu to set the hard disk drive, Select the item and press <Enter> to open the following menu:
InsydelH2O Setup Utility
Advanced
| Channel 1 Master | [WDC | Item Specific Help | ||
| Type : |
| [Auto] |
| |
| Transfer Mode: | [Auto] |
| ||
| 32Bit I/O: |
| <Enabled> |
| |
| Block Mode: |
| <Enabled> |
| |
| Transfer Mode: | <Ultra DMA |
| ||
| S.M.A.R.T |
| <Enabled> |
| |
| Security Mode: | Uninstall |
| ||
|
|
|
|
| |
|
|
|
|
|
|
| F1 Help | ↑↓ Select Item | F7/F8 Change Values | F9 Setup Default | |
| ESC Exit | ←→Select Menu | Enter | F10 Save and Exit | |
Channel 1 Master
Displays the name of the current hard disk device in channel 1 master.
Type:
Figure 2.6 Channel 1 Master submenu
If you leave this item at Auto, the system will automatically detect and configure the device it channel
1 master. If you change the value to User Defined and then manually configure the drive by entering the characteristics of the drive in the fields described below:
•32Bit I/O – when enabled, allows the system to improve the hard drive performance for 32Bit OS.
•Block Mode – when enabled, allows the system to perform accesses to the hard disk in block mode.
•Transfer Mode – displays the data transfer mode.
•S.M.A.R.T – when enabled, allows the system to support S.M.A.R.T
•Security Mode – displays the security mode status.
18 C H A P T E R 2 B I O S S E T U P