Lenovo TD230 manual Managing users, Log-in security configuration, Configuring Ldap Settings

Option	Task Description
LAN Channel number drop-down box	It lists the LAN Channel(s) available for server
	management. The LAN channels describe the physical
	NIC connection on the server. Remote Management
	Module channel is the add-in Remote Management
	Module NIC.
	The Baseboard Mgmt channel (BMC LAN Channel 1) is
	the onboard, shared NIC configured for management and
	shared with the operating system.
MAC Address	The MAC address of the device (read only)
IP Address	Select the type of IP assignment with the radio buttons.
	If configuring a static IP, enter the requested address,
	subnet mask, and gateway in the given fields.
	Notes:
	• IP Address made of 4 numbers separated by dots as
	in “xxx.xxx.xxx.xxx”.
	• “xxx” ranges from 0 and 255.
	• First “xxx” must not be 0.
Save button	Click it to save any changes made.

Managing users

The User List page lists the configured users, along with their status and network privilege.

This page has options to configure the IPMI users and privileges for this server. To add a user, select an empty slot in the list and click Add User to add a new user. To modify a user, select a user in the list and click Modify User to modify the settings. To delete a user, select a user in the list and click Delete User to delete.

Notes:

•UserID 1 (anonymous) may not be renamed or deleted.

•UserID 2 (root) may not be renamed or deleted; nor can the network privileges of UserID 2 be changed.

•User Names cannot be changed. To rename a User you must first delete the existing User, and then add the User with the new name.

Log-in security configuration

You can set the login security of the user in this page.

Failed Login Attempts: set the number of failed login attempts by the user. In case the user has exceeded the maximum number of unsuccessful attempts, the user account will be locked. 0 means no lockout. The default number of failed login attempts is 3.

User Lockout Time (min): set the account lockout time in minutes by the user in consideration of user’s need.

Configuring LDAP Settings

To enable or disable LDAP, check or uncheck the Enable LDAP Authentication check box respectively.

The following table lists the options available in this page:

Chapter 6. Remote Management Module Web Console options 17