Option | Task |
|
|
Enable LDAP Authentication | Check this box to enable LDAP authentication, then enter |
| the required information to access the LDAP server. |
|
|
Port | Specify the LDAP Port. |
|
|
IP Address | The IP address of LDAP server |
| Notes: |
| • IP Address made of 4 numbers should be separated by |
| dots as in “xxx.xxx.xxx.xxx”. |
| • “xxx” must range from 0 to 255. |
| • First “xxx” must not be 0. |
|
|
Bind Password | Authentication password for LDAP server; the password |
| must be at least 4 characters long. |
|
|
Bind DN | The Distinguished Name of the LDAP server, for example, |
| “cn=Manager, |
|
|
Searchbase | The searchbase of the LDAP server, for example, |
| |
|
|
Save button | Click it to save the current settings. |
|
|
Configuring SSL Upload
Use this page to upload an SSL certificate and privacy key, which allows the device to be accessed in secured mode.
First upload the SSL certificate and then the device will prompt to upload privacy key. If either of the files is invalid the device will notify. The device will give notification on successful upload. On successful upload, device will prompt to reboot the device. If you want to reboot, click Ok or click Cancel to cancel the reboot operation.
First upload the SSL certificate and then the device will prompt to upload the privacy key. Click Upload. On successful upload, a notification is displayed.
Configuring Remote Session
Use this page to enable or disable the encryption on KVM or Media during a redirection session.
The following table lists the options allowing you to enable or disable the encryption on KVM or media data during a redirection session:
Option | Task |
|
|
Enable/Disable Encryption mode | Enable/Disable the encryption on KVM or Media data |
| during a redirection session. |
| Notes: |
| • KVM and Media encryption are enabled by default. |
| • Disabling encryption can improve performance of KVM |
| or Media redirection. |
|
|
Save button | Click it to use selected modes. |
|
|
Configuring Mouse Mode Setting
Click the Mouse Mode tab to view the Mouse Mode Setting window.