Option | Task Description |
|
|
Sensor selection | Select the type of sensor readings to display in the list. |
| The default is to see all sensors. |
|
|
Sensor Readings list | Selected sensors shown with their name, status, and |
| readings. |
|
|
Show Thresholds button | Click it to expand the list, showing low and high threshold |
| assignments. See the critical (CT) and |
| thresholds for the selected sensors. Use scroll bar at the |
| bottom to move display left and right. |
|
|
Hide Thresholds button | Click it to return to original display, hiding the threshold |
| values. |
|
|
Refresh | Click it to refresh the selected sensor readings. |
|
|
Viewing Event Log
The Event Log page displays the event logs.
The following table lists the options available in this page:
Option | Task Description |
|
|
Event Log category | Select the type of events to display in the list. |
|
|
Event Log list | Selected sensors are shown with their name, status, and |
| readings. This includes a list of the events with their ID, |
| time stamp, sensor name, sensor type, and description. |
|
|
Clear Event Log button | Click it to clear the event logs. |
|
|
Configuring settings
The Configure Settings page is used to configure settings. By default, it opens in the Network Settings window.
Warning: The Remote Management Module IP address must be on a different subnet than the baseboard IP address used for management traffic.
Configuring network settings
The Network Settings page is used to configure the network settings. It provides options to do either of the following:
•Automatic: Obtain the IP address automatically (use DHCP).
•Manual: Manually configure one.
The following table lists the options available in this page: