Lenovo 3379, 9964, 6137 Password considerations, Power-On Password, Privileged Access Password

Password considerations

A password can be any combination of up to 12 alphabetic and numeric characters. For security reasons, it is recommended to use a strong password that cannot be easily compromised. To set a strong password, use the following guidelines:

vHave at least eight characters in length

vContain at least one alphabetic character and one numeric character

vSetup Utility program and hard disk drive passwords are not case sensitive

vNot be your name or your user name

vNot be a common word or a common name

vBe significantly different from your previous password

Power-On Password

When a Power-On Password is set, the computer cannot be used until a valid password is typed from the keyboard.

Privileged Access Password

When a Privileged Access Password is set, it deters unauthorized persons from changing configuration settings. If you are responsible for maintaining the settings of several computers, you might want to set a Privileged Access Password.

After you set a Privileged Access Password, a password prompt is displayed each time you try to access the Setup Utility program.

If both the Power-On and Privileged Access passwords are set, you can type either password. However, to change any configuration settings, you must use your Privileged Access Password.

Hard Disk User Password

When a Hard Disk User Password is set, it prevents unauthorized users from accessing the data on the hard disk drive.

Setting, changing, and deleting a password

To set, change, or delete a password, do the following:

Note: A password can be any combination of up to 12 alphabetic and numeric characters. For more information, see “Password considerations.”

1.Start the Setup Utility program. See Chapter 4, “Using the Setup Utility,” on page 47.

2.From the Setup Utility program, select Security → Set Passwords.

3.Read the information displayed on the right side of the screen.

48User Guide