Lenovo 9643, 9638, 9644, 9645, 9640 Operating environment, Electrical current safety information

Page 13

vRemove dust from vents and any perforations in the bezel. More frequent cleanings might be required for computers in dusty or high-traffic areas.

vDo not restrict or block any ventilation openings.

vDo not store or operate your computer inside furniture, as this might increase the risk of overheating.

vAirflow temperatures into the computer should not exceed 35° C (95° F).

vDo not use non-desktop air filtration devices.

Operating environment

The optimal environment in which to use your computer is 10°C-35°C (50°F-95°F) with humidity ranging between 35% and 80%. If your computer is stored or transported in temperatures less than 10°C (50°F), allow the cold computer to rise slowly to an optimal operating temperature of 10°C-35°C (50°F-95°F) before use. This process could take two hours in extreme conditions. Failure to allow your computer to rise to an optimal operating temperature before use could result in irreparable damage to your computer.

If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.

Keep electrical appliances such as an electric fan, radio, high-powered speakers, air conditioner, and microwave oven away from your computer because the strong magnetic fields generated by these appliances can damage the monitor and data on the hard disk drive.

Do not place any beverages on top of or beside the computer or other attached devices. If liquid is spilled on or in the computer or an attached device, a short circuit or other damage might occur.

Do not eat or smoke over your keyboard. Particles that fall into your keyboard can cause damage.

Electrical current safety information

Danger

Electrical current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard:

vTo prevent possible shock hazard, do not use your computer during a lightning storm.

vDo not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.

vConnect all power cords to a properly wired and grounded electrical outlet.

vConnect to properly wired outlets any equipment that will be attached to this product.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or structural damage.

Important safety information

xi

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Page Page Page Contents Appendix A. Manual modem Conditions that require immediate action Important safety informationService and upgrades General safety guidelinesStatic electricity prevention Voltage-selection switch Power cords and power adaptersPlugs and outlets Extension cords and related devicesExternal devices BatteriesHeat and product ventilation Operating environment Electrical current safety informationModem safety information Lithium battery noticeTo connect To disconnect Laser compliance statement Power supply statementCleaning and maintenance Data safetyAdditional safety information Introduction Xvi User Guide Comfort Arranging your workspaceGlare and lighting Electrical outlets and cable lengths Air circulationConnecting your computer Setting up your computerUser Guide Setting up your computer User Guide 1394 Finishing the software installation Turning on powerCompleting important tasks Updating your operating system Installing other operating systemsUpdating your antivirus software Shutting down the computerUser Guide Features Installing optionsMemory Expansion Available options Dimensions SpecificationsWeight EnvironmentTools required Supported operating positionsHandling static-sensitive devices Installing external options Locating connectors on the rear of your computer Obtaining device drivers Connector DescriptionOpening the cover Locating components Accessing system board components and drives Identifying parts on the system board Bios WPInstalling memory What to do next Installing PCI adaptersInstalling internal drives Drive specifications Installing a drive in bay Connecting a serial ATA drive Installing a diskette drive in bay Installing options Security features Changing the battery Integrated cable lock Password protectionErasing a lost or forgotten password clearing Cmos Closing the cover and connecting the cables User Guide Creating and using the Product Recovery disc Recovering softwarePerforming backup and recovery operations Using the Rescue and Recovery workspace Creating and using rescue media To create rescue media, do the following Creating and using a Recovery Repair disketteRecovering or installing device drivers Solving recovery problems Setting a rescue device in the startup sequenceUser Guide Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsAdministrator Password User PasswordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a temporary startup device Selecting a startup deviceChanging the startup device sequence Exiting from the Setup Utility program Advanced settingsUpdating flashing Bios from a diskette or CD-ROM Using system programsUpdating system programs Recovering from a POST/BIOS update failure Updating flashing Bios from your operating systemUpdating system programs User Guide Basic troubleshooting Troubleshooting and diagnosticsSymptom Action Diagnostic programs PC-Doctor for DOS PC-Doctor for WindowsCreating diagnostic diskettes PC-Doctor for Windows PE Cleaning the mouseOptical mouse Non-optical mouse Troubleshooting and diagnostics User Guide Information resources Getting information, help, and serviceOnline Books folder ThinkVantage Productivity CenterSafety and Warranty Access HelpHelp and service Calling for service Using the documentation and diagnostic programsPurchasing additional services Using other servicesBasic AT commands Appendix A. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix A. Manual modem commands User Guide Appendix B. Notices Trademarks Television output noticeIndex Page Page Part Number 42Y4610
Related manuals
Manual 108 pages 62.94 Kb

TC A55-9636, 9640, 9645, 9644, 9643 specifications

Lenovo has consistently been at the forefront of innovation in the computing world, with a range of laptops and desktops that cater to a variety of needs and preferences. Among their popular offerings are the Lenovo 9640, 9643, TC A55-9636, 9644, and 9645. Each of these models is designed to provide exceptional performance, reliability, and user-friendly experience, making them appealing choices for both personal and business use.

The Lenovo 9640 is renowned for its sleek design and powerful performance. This model is equipped with the latest Intel processors, ensuring smooth multitasking and efficient power consumption. It features a vibrant display that provides excellent color accuracy and vivid visuals, making it ideal for content creators and casual users alike. With ample storage options and high-speed SSD configurations, users can expect fast boot times and quick file access.

Similarly, the Lenovo 9643 builds on this legacy, offering enhanced graphics capabilities with dedicated GPU options. This feature is particularly beneficial for gamers and professionals who rely on graphical performance for tasks such as video editing or 3D modeling. The 9643 also emphasizes connectivity, providing a range of ports, including USB-C, HDMI, and Ethernet, ensuring users can easily connect to peripherals and networks.

The TC A55-9636 is Lenovo's entry into the compact desktop market, designed for users seeking a powerful, space-saving solution. With its robust performance metrics and energy-efficient components, the A55-9636 is perfect for both home and office environments. It supports a variety of multitasking scenarios, making it suitable for productivity-driven tasks, while its expandable architecture means users can upgrade components as their needs evolve.

The Lenovo 9644 and 9645 round out this impressive lineup with their focus on business-centric features. These models provide enhanced security options, including fingerprint readers and TPM chips, catering to enterprises that prioritize data protection. With long battery life and solid build quality, both models promise durability and reliability, critical for professionals who are always on the go.

All models in this series showcase Lenovo's commitment to sustainability, incorporating eco-friendly materials and energy-efficient technologies. The user-friendly interfaces across the devices ensure a seamless experience, meeting the demands of a broad user base from students to business executives. In summary, the Lenovo 9640, 9643, TC A55-9636, 9644, and 9645 represent a versatile range of computing solutions that combine cutting-edge technology with efficiency, ensuring users can achieve their goals effectively and stylishly.
Top Page Image Contents