Chapter 6. Troubleshooting
Lenovo OneKey Recovery system
Where are the recovery discs?
Your computer did not come with recovery discs. Use Lenovo OneKey Recovery system if you need to restore system to the factory status.
What can I do if the backup process fails?
If you can start backup but it fails during the backup process, try the following steps:
1Close all open programs, then restart the backup process.
2Check if the destination media is damaged. Select another path and then try again.
When do I need to restore the system to the factory status?
Use this feature when the operating system fails to start up. If there is critical data on the system partition, back it up before starting recovery.
BIOS setup utility
What is BIOS setup utility?
The BIOS setup utility is
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1Shut down the computer.
2Press the Novo button and then select BIOS Setup.
How can I change the boot mode?
There are two boot modes: UEFI and Legacy. To change the boot mode, start the BIOS setup utility and set boot mode to UEFI or Legacy support on the boot menu.
32