Lenovo 7578, 7595, 7577, 7597 Installing or replacing hardware, Handling static-sensitive devices

Chapter 2. Installing or replacing hardware

This chapter provides instructions on how to install or replace hardware for your computer.

Attention: To prevent possible damage to your computer, do not remove the computer cover and install or replace internal parts by yourself. See Chapter 7 “Getting information, help, and service” on page 31 for more information about help, service, and technical assistance for Lenovo products.

This chapter contains the following topics:

•“Handling static-sensitive devices” on page 11

•“Installing or replacing hardware” on page 11

•“Obtaining device drivers” on page 13

•“Basic security features” on page 13

Handling static-sensitive devices

Do not open the static-protective package containing the new part until the defective part has been removed from the computer and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage computer components and parts.

When you handle computer parts and components, take these precautions to avoid static-electricity damage:

•Limit your movement. Movement can cause static electricity to build up around you.

•Always carefully handle the parts and other computer components. Handle PCI cards, memory modules, system boards, and microprocessors by the edges. Never touch exposed circuitry.

•Prevent others from touching the parts and other computer components.

•Before you replace a new part, touch the static-protective package containing the new part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the package and your body.

•Remove the new part from the static-protective package and directly install it in the computer without placing it on any other surface. If it is hard for you to do this in your specific situation, place the static-protective package of the new part on a smooth, level surface, and then place the new part on the static-protective package.

•Do not place the part on the computer cover or other metal surface.

Installing or replacing hardware

This section provides instructions on how to install or replace hardware for your computer.

Notes:

1.Use only computer parts provided by Lenovo.

2.When installing or replacing an option, use the appropriate instructions in this section along with the instructions that come with the option.

Installing external options

You can install external options to your computer, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When you install an external option, see “Locating connectors, controls, and indicators on the front of your

© Copyright Lenovo 2010 11