Figure 22. Removing the microprocessor
6.Make sure that the small handle is in the raised position.
7.Remove the new microprocessor 1 from the protective cover new microprocessor.
2
that protects the gold contacts of the
8.Hold the new microprocessor by the edges and align the notches on it with the tabs in the microprocessor socket, or align the small triangle on one corner of the microprocessor with the corresponding beveled corner of the microprocessor socket.
9.Lower the new microprocessor straight down into the microprocessor socket on the system board.
10.Close the microprocessor retainer and lock it into position with the small handle to secure the new microprocessor in the socket.
11.Reinstall the heat sink and fan assembly. See “Replacing the heat sink and fan assembly” on page 21.
12.Reinstall any parts and reconnect any cables that have been removed or disconnected.
What to do next:
•To work with another piece of hardware, go to the appropriate section.
•To complete the replacement, go to “Completing the parts replacement” on page 40.