Lenovo C445, 57315617, 57312695, 57315603, C440, C345, C540 manual Replacing the hard disk drive

Page 39

6.Push out the latches on both sides of the memory socket to release the

memory module and gently pull the memory module upward to remove it from its socket. All of the memory modules can be removed using the same procedure.

7.To install a memory module:

Align the new memory module with the memory socket, then insert it and push down on the top edge. Make sure the latches lock the memory module in place.

8.Reattach the foot cover and stand base.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage.

1.Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices.

2.Unplug all power cords from electrical outlets.

3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to “Left and right views” and “Rear view” for help with locating the various connectors.

34User Guide

Image 39
Contents Lenovo C3/C4/C5 Series Important Safety Information Page Contents Hardware Replacement Guide Using the Computer Hardware Front view of the computer Left and right views of the computer Rear view of the computer Installing the computer stand Computer stand Connecting your computer Connecting the power cord Important information about using the computer Connecting to the Internet Wired keyboard selected models onlyUsing Windows Shutting down the computer Switching between the main Windows 8 interfacesSwitching between apps Charms BarClosing an app Opening other system programsWindows Help and Support User Guide Using the Rescue System OneKey Recovery Driver and Application Installation Method 1 Automatic InstallationMethod 2 Manual Installation User Guide Troubleshooting Confirming Setup Troubleshooting Display Problems Solving ProblemsTroubleshooting Audio Problems Troubleshooting Software Problems Troubleshooting Problems with Optical Drives and Hard Disks Special considerations for troubleshooting Windows When do I need to change the boot mode? Bios setup utilityPerforming Daily Maintenance Tasks Hardware Replacement Guide Overview Safety information for replacing CRUsTools required Additional information resourcesHandling static-sensitive devices Replacing hardware General informationRemoving the stand base Removing the foot cover Replacing a memory module Replacing the hard disk drive User Guide Replacing the optical drive User Guide Replacing the adapter Connect the new adapter as shown To replace the keyboard Replacing the keyboard and mouseDeclaration AppendixTrademarks 10102/4773 10103/4751 10104/6595 10105/6596 10110/6267 Energy Star StatementEnabling ErP compliance mode