Lenovo V470C, V570C manual

Page 42

38

a1

c

b

4 Install a fully charged battery.

5 Slide the manual battery latch to the locked position.

6 Turn the computer over again. Connect the AC adapter and the cables to the computer again.

unlocked position

b , remove the battery pack in the direction shown by the arrow

c .

a . Holding the spring-loaded battery latch in the

Unlock the manual battery latch

2 Close the computer display, and turn the computer over.

3

To replace the battery, do the following:

1 Turn off the computer, or enter hibernation mode. Disconnect the AC adapter and all cables from the computer.

Note:

Use only the battery provided by Lenovo. Any other battery could ignite or explode.

Appendix A. CRU instructions

Notes:

• The illustrations used in this chapter are of the Lenovo V570c, unless otherwise stated.

• The following steps about upgrading and replacing devices are the same for the V470c and V570c.

Replacing the battery ---------------------------------------------------------------------------------------------------

Image 42

Contents Lenovo V470c/V570c Regulatory Notice Contents Page Getting to know your computer „ V470c„ V570c Built-in microphone Touchpad Getting to know your computer Numeric keypad V570cVGA port „ V470cFan louvers RJ-45 portUSB port Right-side view „ V470c „ V570cGPU Graphics Processing Unit switch Select models only Device switch Select your computerMemory card slot Bottom view SIM card slot Select models only Learning the basics „ Conncting to the power„ Configuring the operating system „ Reading the manualsLearning the basics Shutting down your computer„ Removing the battery pack „ Checking battery status„ Charging the battery „ Handling the batteryLeft click button Right click button„ Numeric keypad V470cV570c „ Function key combinations Learning the basics Inserting a memory card „ Using memory cards not supplied„ Connecting a universal serial bus USB device Removing a memory card„ Connecting a Bluetooth device Select models only Enabling Bluetooth communications on your computerSwitching GPU Select models only To change the GPU, do the followingSpecial keys and buttons „ OneKey Rescue system buttonThese indicators inform you of the computer status „ V570c Page „ Using passwords „ Attaching a security lock not supplied„ Fingerprint reader Select models only „ Hardware connection Connecting to the Internet„ Software configuration CableEnabling wireless connection „ Using Wi-Fi/WiMAX Select models onlyConnecting to the Internet Software configuration„ Using Mobile Broadband Select models only Connecting to the Internet Inserting the SIM card V570c Connecting to the Internet Removing the SIM card OneKey Rescue system „ IntroductionTroubleshooting Frequently asked questionsTroubleshooting When do I need to restore the system to the factory status?Display problems Password problemTroubleshooting Sleep or hibernation problems Computer screen problemsSound problems Startup problem Troubleshooting Battery problemsHard disk drive problem OneKey Rescue system problemsTroubleshooting Other problems Page Appendix A. CRU instructions Handling a hard disk driveAppendix A. CRU instructions Appendix A. CRU instructions Appendix A. CRU instructions Sdram Appendix A. CRU instructions Appendix A. CRU instructions Removing the optical drive only for V470c Trademarks Do not Return IT to the Store If your product is not working correctlyNew World. New Thinking.TM