Lenovo 4304493 manual Audio, From, Digital Device

Warp Version 4

For Digital Audio (WAVE) setup:

1Run STPM.EXE in the MMOS2 directory.

2	Select the	Digital	Audio	tab. Then remove the check mark
	from the	Default	Digital	device.

3Click on the + mark at the top right corner of the Digital Audio window.

4	Select WAV	in the		Current		extensions.
5	Move the cursor to the				New	extension.		Then press the Space
	bar and click	on	Remove		.
6	Select the Digital		Audio	2		tab.	Then check the		Default Digital
	device.
7	Click on the	+ mark at the top				right	corner of	the	Digital Audio
	window.
8	Type WAV at the		New		extension, and then click on				Add .

9Close Multimedia Setup. For Sequencer (MIDI) setup:

1 Run STPM.EXE in the MMOS2 directory.

2Select the MIDI tab. Then remove the check mark from the

Default Sequencer device.

3Click on the + mark at the top right corner of the dialog window.

4	Select MID	in the		Current	extensions.
5	Move the cursor to the			Next extension.		Then press the Space
	bar and click		on Remove		.
6	Select the	MIDI	2	tab.	Then check the	Default Sequencer
	device.

7Click on the + mark at the top right corner of the dialog window.

8	Type MID at the New	extension, and then click on	Add .
9	Close Multimedia Setup.

Part 2: User's Guide 2-23