Lenovo 4304493 manual Selective installation, Part 1 Quick Installation Guide

Attention

Be sure

to

insert

and

remove

the

interface

cable

and

PC

Card

carefully.

The

connectors

on

the

interface

cable

are

designed to be

inserted

in

only

one

position;

they

cannot be

inserted

upside

down. If

you

try to

insert

the

connectors

upside

down,

you

might

damage

them.

Make

sure

that the

pins

on

the

cable

connectors

are

aligned

with

the

holes in

the

interface

connectors.

If

they

are

not

aligned

and

you

force

the

connection,

you

might

damage

the

connectors.

Also,

if

you

use

excessive force

when

inserting

the

PC

Card,

you

might

damage

the

card

or

your

computer.

2Make sure that your computer and the CD-ROM drive are

turned

off.

Squeeze

both

sides

of

the

large

connector

on

the

interface

cable,

and

connect

it

to

the

end

of

the

PC

Card.

Squeeze

both

sides

of

the

small

connector

on

the

interface

cable,

and

connect

it

to

the CD-ROM drive

interface

connector

.3/

(Bottom

view).

Plug

the

PC

Card

into

an

available

PC

Card

slot

on

your

computer.

3Turn on the computer and turn on the CD-ROM drive by

moving the power switch .7/ (Bottom view) to the ON position.

4Install the device drivers.

a. If	you	are	using DOS or		Windows	3.11:
1)	For	DOS:	Insert	the	Option Diskette into drive A. At
	the	DOS	prompt	type	a:\install	, then follow the

instructions

on

the

screen. When

installation

completes,

restart DOS.

2) For

Windows

3.11:

Insert

the

Option

Diskette

into

drive

A.

Using

File

Manager

,

go

to

Filethe

menu,

select

Run

,

then

typea:\install

on

the

command

line.

You

will

be

prompted

to

choose

one

of

two

installation

options.

Automatic

installation

The

setup

program

will

automatically

install

the

required

software

into

your

computer.

Selective installation

The setup program installs the required software into your computer after you specify the following items:

Ÿ	Software	installation		destination
Ÿ	Installation		destination	directory	name

ŸIRQ number

Ÿ I/O base address

3) If

you

have

Windows

3.11

and

are

installing

the

audio

device

driver:

a)

Insert

the

Option

Diskette

into

drive

A.

Use

File

Manager

to

locate

setup.exe

,

then

double-click

on

it.

b)

Run

Install

Driver

and

Install

Application

according

to

the

instructions

on

the

screen. Then

restart

your computer.

Part 1: Quick Installation Guide 1-3