Using the Serial ATA Hard Drive Bay Adapter III
This section provides information on installing a supported hard disk drive into your Ultrabay media bay using the Serial ATA Hard Drive Bay Adapter III.
Note: The adapter supports only the
Handling a hard disk drive
To protect a hard disk drive during installation, observe the following precautions:
vKeep the drive in its
vHandle the drive with care. Dropping or jarring the drive can damage the components inside the drive housing.
vLimit your movement. Movement can cause static electricity buildup.
vDo not subject the drive to physical shocks.
vHandle the drive by the edges.
vDo not touch any exposed components on the drive.
vDo not apply pressure to the cover of the drive.
Attention: The hard disk drive is very sensitive. Incorrect handling can cause damage and permanent loss of data on the drive.
© Copyright Lenovo 2009 |