Note about the service partition:
The files and relevant data used by the rescue system are saved in the service partition. Deleting this partition will render the rescue system unusable. For detailed operation information, see the following instructions:
By selecting Control Panel → Management Tools → Computer Management
→Disk Management, you can see the service partition, which must not be deleted.
Note: The recovery files and relevant data used by the rescue system are saved in the service partition. If the service partition is deleted or damaged by someone other than authorized Lenovo servicers, Lenovo shall not be liable for any losses arising there from in any way.
2.1Installing Drivers and Software Shipped with Your Computer
The Installing drivers and software function in the rescue system provides a way for the user to conveniently install the drivers and software shipped with the computer. It can install all drivers and software shipped with the computer automatically, and it also can selectively install some of the drivers and software as required by the user.
Method 1: Automatic Installation
Turn on the computer. When the screen displays the Lenovo picture initially, press the F2 key on the keyboard to start the Rescue System, select Install drivers and software.
Install them as prompted. Click Install to start installing the drivers and software. The system will restart. After the system is restarted, the installation process will continue until completion.
Method 2: Manual Installation
In the Windows system, Click Start → All Programs → Lenovo → Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually according to the prompt.
12User Guide