Power CORD：

Connecting the Video Cable:

1.The monitor may work at 100---120VAC or 200---240V AC area. (No user adjustment is required.)

2.Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.

the monitor comes with a built-in video cable. Plug the signal cable’s 15-pin connector into the computer’s video port and tighten the two screws on the cable connector. (See figure 2)

Caution: Don’t bend the signal cable, otherwise it will break the inner wire.

Connecting the Power Cord：Plug the power cord into the monitor’s AC power socket. Then plug the power cord into a grounded AC outlet.

Caution：If the AC outlet is not grounded, install the proper grounding adapter (not supplied).

①

②

Figure 2. Connecting signal cable

Power Cord

Signal Cable

Please keep your user manual, monitor packages on a safety place for further using.

41CD785-608-4B