2.GEOMETRY
2.1ROTATION
Adjust the picture tilt to horizontal position.
2.2PINCUSHION
Adjust the pincushion and barrel.
2.3BALANCED PINCUSHION
Adjust to compensate the pincushion unbalance.
2.4TRAPEZOID
Adjust the picture’s trapezoid distortion.
2.5PARALLELOGRAM
Adjust the picture to be a rectangle.
：
：
：
：
：
：
3.MOIRE
：
| Moire is the result of interference between the phosphor layout and the video signal. | |
| In some cases, you may find the moire very noticeable. Press the MENU to enter in | |
| the moire reduce setting. Please adjust the level to the optimum condition. Note: Too | |
| high of a setting | will cause the picture to shake. |
4. | LANGUAGE | ： |
Select the language as you like.
5.OSD TIMER
Choose OSD window display time.
6.DEGAUSS
If color impurity occurs when moving degauss to fix the picture condition.
7.COLOR TEMPERATURE
：
：
or swiveling the monitor, press MENU Key and
：
7.16500K/9300K ( COLOR TEMPERATURE)
The color temperature for 6500K is x=0.313, y=0.329 and 9300K is x=0.283, y=0.297. It presents two different color sets on the screen. You can select 9300K or 6500K by pressing MENU Key.
7.2 USER MODE ( Red / Green/ Blue )
If the 9300K normal white or 6500K warmer white do not satisfy your desire, properly adjust R .G. B GAIN controls to obtain your optimum whiteness level.
8 | SUPER BRIGHTNESS QUALITY | ： |
|
Shift the function of Super Brightness Quality
9.EXIT OSD：
Close OSD window.
10.RESET：
Press RESET to restore the monitor to factory settings.
9 |