Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to re- attach the CRT monitor temporarily until you have re-configured the system; preferably to 1600 x 900 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table 2-3.Factory set display modes

Addressability		Refresh rate

640 x 350		70Hz

640 x 480		60Hz 72Hz 75Hz
700 x 570		50Hz

720 x 400		70Hz
800 x600		56Hz 60Hz 72Hz 75Hz

832 x 624		75Hz
1024 x 768		60Hz 70Hz 75Hz

1366 x 768		60Hz
1152 x 864		75Hz

1280x1024		60 Hz 70Hz 75Hz
1440x900		60Hz 75 Hz
1600x900		60Hz 75 Hz

Chapter 2. 2-7