Lenovo 3028LB2 2. OSD functions, OSD Icon, Submenu, Description, on Main, Menu, Analog, Digital

Table 2-2. OSD functions

	OSD Icon	Submenu	Description				Controls and	Controls and
	on Main						Adjustments	Adjustments
	Menu						(Analog)	(Digital)
		Brightness	Adjusts overall brightness.					Same as
Brightness-								Analog
		Contrast
/Contrast			Adjusts difference between light and dark areas.
		light sensor	Monitor can detect environment luminance to adjust monitor's
			brightness for power saving .
		Horizontal Position	Moves the image left or right.
	Image							Controls
	Position	Vertical Position	Moves the image up or down.					Locked not
								required for
		Automatic	Automatically optimizes the image.					digital input
	Image
			Manually optimizes the image. See "Menual mage setup" page 3-4.
	Setup
		Manual	. Clock	. Phase	. Save
		Color	Adjusts intensity of red, green, and blue.
			• Neutral	• sRGB	• Reddish	• Bluish
	Image	Preset mode						Same as
	Properties		. Red: Increases or decreases the saturation of "red" in the image.					Analog
		Custom	. Green: Increases or decreases the saturation of "green" in the image.
			. Blue: Increases or decreases the saturation of "blue" in the image.
			Save: Saves the custom color choices.
			This monitor can accept video signals through two different
			connectors. Most desktop computers use a D-SUB connector.
		Input Signal	Select digital among OSD Controls when you use DP connector.
			. Selects D-SUB (Analog)
			. Selects DP
			Expends image size to full screen.
		Scaling	. Off (Original AR)
			. On (Full)
		Over Drive	Response time enhancement.
		Image select menu	Image select menu
		Dual	Dual Image Mode.
	Image
select menu		Swap	Swap left and right image.

Set analog input signal to full image.

Single

Set Display port input signal to full image.

Single

*Note: Brightness and Contrast can not be adjusted in sRGB mode.

2-5 LT2323zwC Flat Panel Monitor User’s Guide