Program the Water Softener -- Model WHES20
Display | UP button |
| + |
|
| − |
|
| PRESSTOSCHEDULE | PROGRAM |
| HOLDTOSTART | |
|
| |
| RECHARGE |
|
RECHARGE button | PROGRAM button | DOWN Button |
Figure 10
If you have questions about installation, programming, operating and routine maintenance...
call
When the transformer is plugged into the electrical outlet, a model code and a test number (example: s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words “PRESENT TIME” begin to flash.
| If - - - - shows in the display, press the UP + or DOWN | − |
NOTE: | button until LE20 |
shows in the display. Then, press the PROGRAM button to set, and change to the flashing “PRESENT TIME” display.
Set Time of Day
If the words “PRESENT TIME” do not show in the display, press the PROGRAM button until they do.
1. Press the + Up or | − |
|
|
Down buttons to set the present time. Up moves the display ahead; down | |||
sets the time back. |
|
|
|
|
| PM | AM |
|
|
| |
| PRESENT TIME |
| PRESENT TIME |
Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons down for fast advance. This procedure applies for all following settings.
17