Program the Water Softener -- Model WHES30
SET SALT LEVEL button | Display | UP button |
SET |
| + | |
SALT |
| ||
|
| ||
LEVEL |
|
| |
|
| PROGRAM | |
CHECK | PRESSTOSCHEDULE | − | |
SALT | |||
HOLDTOSTART | |||
LEVEL |
| ||
| RECHARGE |
| |
RECHARGE button | PROGRAM button | DOWN Button |
Figure 11
If you have questions about installation, programming, operating and routine maintenance...
call
When the transformer is plugged into the electrical outlet, a model code and a test number (example: s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words “CURRENT TIME” begin to flash.
| If - - - - shows in the display, press the UP + or DOWN | − |
NOTE: | button until LE31 |
shows in the display. Then, press the PROGRAM button to set, and change to the flashing CURRENT TIME display.
Set Time of Day
If the words “CURRENT TIME” do not show in the display, press the PROGRAM button until they do.
1. Press the + Up or | − |
Down buttons to set the present time. Up moves the display ahead; down | |
sets the time back. |
|
Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold for fast advance. This procedure applies for all following settings.
19