Manuals / Whirlpool / Household Appliance / Water System

Whirlpool WHES30 manual Installation, Turn Off Water Supply, Install the Brine Tank Overflow Elbow

Models: WHES30 WHES20

1 39

Download 39 pages 28.68 Kb

Page 12

Installation

Installation

Turn Off Water Supply

1.Close the main water supply valve, near the well pump or water meter.

2.Open all faucets to drain all water from the house pipes.

NOTE: Be sure not to drain water from the water heater, as damage to the water heater elements could result.

Install the Brine Tank Overflow Elbow

Install the brine tank overflow grommet and elbow in the 13/16” diameter hole in the back of the salt storage tank sidewall.

NOTE: The salt storage tank drain elbow accepts either 1/2” or 3/8” I. D. hose.

Nozzle venturi assembly

Nut---ferrule

Salt hole cover

Brine tubing

Salt storage tank

Stand tube

Top cover

Brine tank overflow elbow

Brine tank overflow grommet

13/16” hole

Brinewell cover

Brinewell

Float stem

Brine valve

Figure 6

12

Image 12

Whirlpool WHES30, WHES20 manual Installation, Turn Off Water Supply, Install the Brine Tank Overflow Elbow

Contents

Do not return water softener to store 1--866--986--3223Model WHES20 Model WHES30 System Tested and Certified byTable of Contents Water Softener Safety Before You StartInspect Shipment Do not return the water softener to storeWater Softener Dimensions MODELNOMINAL RESIN TANK SIZE WHES20How a Water Softener Works Water Conditioning InformationSoftening Cycle Regeneration CycleFerrous clear water, Ferric red water Installation Requirements Tools and Parts NeededIf using Soldered Copper Pipe If using Threaded PipeLocation Requirements Air Gap RequirementsValve Drain Requirements 1/4” NPT threadHose clamp Drain hosePlan the Installation Inlet ---Outlet Plumbing OptionsFigure See “Air Gap Requirements” sectionInstallation Install the Brine Tank Overflow ElbowTurn Off Water Supply Move the Water Softener into Place Assemble Inlet and Outlet Plumbing Connect Inlet and Outlet PlumbingSoldered copper Install Valve Drain Hose Install Salt Storage Tank Overflow HoseTest for Leaks Threaded pipeSanitize the Softener/Sanitize After Service Add Water and Salt to the Salt Storage TankPlug in Water Softener Program the Water Softener --Model WHES20 Set Time of DaySet Water Hardness Number Set Recharge Regeneration TimeStart a Recharge Program the Water Softener --Model WHES30 Set Time of DaySet Water Hardness Number Set Recharge Regeneration TimeStart a Recharge 20 gpg hardnessCustomizing Features/Options --Model WHES20 ‘‘Power---OutageMemory’’Recharge Recharge TonightSalt Efficiency Customizing Features/Options--Model WHES30 Recharge ScheduledSet Salt Level RechargeWater Flow Indicator ‘‘Power---OutageMemory’’Salt Efficiency Clean / Clear Water Iron Removal Clean Feature MinutesMaximum Days Between Regenerations 12 or 24 Hour ClockRoutine Maintenance Refilling With SaltBreaking A Salt Bridge Cleaning the Nozzle and Venturi Troubleshooting Guide Procedure for removing error code from faceplate1.Unplug transformer from outlet 2.Correct defect 3.Plug in transformerAutomatic Electronic Diagnostics Manual Advance Diagnostics ---Model WHES20Manual Advance Regeneration Check ---Model WHES20 Manual Advance Diagnostics ---Model WHES30 Switch is openSwitch is closed cam not rotatingManual Advance Regeneration Check ---Model WHES30 Product Specifications Performance ClaimsVariable Salt Dose WHES20Wiring Schematic WarrantyWATER SOFTENER WARRANTY TEFLON is a registered trademark of E. I. DuPontSoftener Components 8 7Softener Components DescriptionDescription Softener Components 47 46 45 44 43 39 42 38 41 37 36 35 34Softener Components PartDescription Part