General Operation
After following the installation instructions and getting familiar with the controls, you are ready to operate the monitor.
1.Turn on the monitor, PC and other peripherals you plan to use.
2.After the PC has booted (powered up and finished
3.While looking at the image on the screen, adjust the controls for the image size, centering, brightness and contrast levels you prefer.
4.This monitor is an auto scanning monitor, capable of synchronizing with a variety of video standards automatically. The Scanning Mode Table below indicates the resolution, as well as the horizontal and vertical refresh rates, of some of the modes that this monitor can match to the output of your PC's graphics card.
Other resolutions and standards can also be synchronized and displays on this monitor as long as they are within the horizontal and vertical frequency range of this monitor. See the specifications for this information.