Installation
The supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display.
Connections
To connect your monitor after the video adapter is properly installed:
1.Turn OFF the power to your computer and all its attached options.
2.Position the monitor and the computer so that you can easily get to the back panel of each.
3.Connect the signal cable with
4.Tighten the screws on the video cable connectors to keep them from coming loose and to prevent radio and TV interference.
5.Connect the power cord to the AC receptacle on the back of the monitor. Plug the other end of the power cord into a properly grounded electrical outlet.
6.The
A5