3Troubleshooting
Follow these steps within twenty seconds if there is no sound from the rear speakers and the indicator on the wireless receiver blinks continuously for more than one minute.
For home theater with
1Disconnect the power cord from the wireless receiver for a few seconds and connect it back again.
2Switch to either AUX source or MP3 link source.
3Press and hold 
for three seconds.
»‘PAIRING’ blinks and then ‘PAIRED’ is displayed.
4If ‘FAILED’ is displayed, repeat steps 1 to 3.
For other home theaters
1Disconnect the power cord from the wireless receiver for a few seconds and connect it back again.
2Press 
.
3Press 
INFO.
» A screen is displayed.
4Press 1, then press SURR within ve seconds.
» ‘PAIRING SUCCESS’ is displayed.
5If ‘PAIRING FAIL’ is displayed, repeat steps 1 to 4.
4Product specifications
Note
•Speci cation and design are subject to change without notice.
Wireless receiver
For RWSS5510
•Power supply rating:
•Total output power: 250 W (RMS)
•Power consumption: 50 W
•Standby power consumption: .45 W
•Frequency response: 150 Hz ~ 20 kHz
•S/N Ratio: 65 dB
•Distortion: 1%
•Dimensions (WxHxD): 126 x 131 x 126 (mm)
•Weight: 1.1 kg
For RWSS9500
•Power supply rating:
•Total output power: 300 W (RMS)
•Power consumption: 40 W
•Standby power consumption: .45 W
•Frequency response: 150 Hz ~ 20 kHz
•S/N Ratio: 65 dB
•Distortion: 1%
•Dimensions (WxHxD): 265 x 116 x 106 (mm)
•Weight: 1.4 kg
Wireless transmitter
•Frequency response: 5.8 GHz
•Dimensions (WxHxD): 55 x 53 x 33 (mm)
•Weight: 0.05 kg
English
EN 5