Computer Input
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control | INPUT button | |||
|
|
|
| |
|
| Computer 1 | ||
|
|
| ||
|
|
|
|
|
Computer 2
HDMI
Video
Network
COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1 | Press the MENU button to display the |
| Menu. Use the Point ▲▼ buttons to select Input and |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select Computer 1 and |
| then press the Point ► button to access the submenu |
items.
Remote Control
COMPUTER button
Computer 1
Computer 2
Input Menu
3 When Computer 1 is selected, use the Point ▲▼ buttons to select RGB and then press the SELECT button.
Computer
1
Note:
When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.48).
30