Information
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Direct Operation
Press the INFO. button on the remote control to display the Information Menu.
Menu Operation
Press the Point ▲▼ buttons to select Information. The Information Menu is displayed.
See below for displayed information.
Input
The selected input source is displayed.
The horizontal frequency of the input signal is displayed in KHz or - - - - - when no signal.
The vertical frequency of the input signal is displayed in Hz or - - - - - when no signal. Numbers of Hz doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off , Ready , Shut down or Timer is displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off , On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
Remote Control
INFO.. button
Information Menu
63