Sanyo PLC-XU87, PLC-XU84 Part Names and Functions Wireless Mouse Operation, Remote Control Code

Part Names and Functions

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. See “Connecting to a Computer” on page 17. When the Pointer function is used, the wireless mouse is not available.

L-CLICK button

Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.

PRESENTATION POINTER button

Move the pointer on the screen with this button.

R-CLICK button

Acts as right (click) mouse button while the projector and a computer are connected with a USB cable.

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 51.

1	Press and hold the MENU and IMAGE buttons for
	more than five seconds to switch between the codes.
	The code switches sequentially for one pressing the
	IMAGE button. See the list below.
2	To initialize the remote control code, slide the RESET/
	ON/ALL-OFF switch to “RESET,” and then to “ON.”
	The initial code is set to Code 1.
		Remote Control Code	Number of Times
			Pressing IMAGE
			Button
		Code 1	1
		Code 2	2
		Code 3	3
		Code 4	4
		Code 5	5
		Code 6	6
		Code 7	7
		Code 8	8

While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.

MENU button

IMAGE button

RESET/ON/ALL-OFF switch

14