Sanyo PLC-XU84, PLC-XU87 owner manual Video Input, Noise reduction, Progressive

Video Input

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 78 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off.......... Disabled.
L1	........... Lower reduction
L2	........... Higher reduction

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off.......... Disabled.
L1	........... For an active picture.
L2	........... For a still picture.
Film ........ For watching a film. With this function, the

projector reproduces pictures faithful to the original film quality.

Reset
To reset the adjusted data, select Reset and press the		Image Mode Menu
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.		Move the red frame
		pointer to an image
Store		item to be set and
		then press the
To store the adjusted data, select Store and press the		SELECT button.
	Store icon
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 41.
Quit
			A confirmation box
Exit the Image Adjust Menu.			appears and then
			select [Yes].

✔Notes:

•Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.40).

•Reset and Store icons will be displayed when any adjustment is made.

43