Sanyo PLC-XU87 Maintenance and Cleaning Attaching the Lens Cover, Cleaning the Projection Lens

Page 60

Maintenance and Cleaning

Attaching the Lens Cover

When moving this projector or while not using it over an extended period of time, replace the lens cover.

Attach the lens cover according to the following procedures.

1

Pass the string through a hole of the lens cover.

2

Turn over the projector and remove the screw with a

 

screwdriver.

3

Attach the string with lens cover to a hole at the

 

bottom of the projector and secure it with a screw.

Hole

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Lens Cover

String for the lens cover

Secure it to the hole with a screw.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.

60

Image 60
Contents Network Supported Memory ViewerFeatures and Design Compact Design Logo FunctionTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Air Circulation Moving the ProjectorPositioning Precautions AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions Kensington Security SlotPart Names and Functions Power ON-OFF button Power indicatorLamp Replace indicator Auto Setup buttonPart Names and Functions Remote Control Signal Emission indicatorPart Names and Functions Laser Pointer Function Pointer FunctionSpotlight Pointer Part Names and Functions Wireless Mouse Operation Remote Control CodeRemote Control Operating Range Adjustable FeetInstallation Positioning the ProjectorInstallation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Computer Component in /MONITOR OUTInstallation Connecting the AC Power Cord Projector side AC outlet sideBasic Operation Turning On the ProjectorSelected Input Source and Lamp Control PIN Code Input Dialog BoxBasic Operation Turning Off the Projector How to Operate the On-Screen Menu Basic Operation Remote ControlTop Control On-Screen MenuBasic Operation Menu Bar For computer sourceFor video source Sound Adjustment Zoom and Focus AdjustmentBasic Operation Auto Setup Function Remote Control OperationRemote Control Keystone CorrectionFreeze button Computer Input Input Source Selection RGB Computer 1 Analog/ComputerPointer to Computer 1 Digital, and then press Computer Input Computer System Selection PC System MenuComputer Input Auto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjComputer Input Manual PC Adjustment To clear adjusted data parameters To store adjusted dataComputer Input Computer Input Image Mode Selection Computer Input Image Adjustment Screen Size Adjustment NormalTrue WideDigital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoAuto Input MenuRGB Scart Video Input Video System Selection Video or S-VideoAV System Menu Video or S-Video ComponentVideo Input Image Mode Selection CinemaImage1-4 Video Input Image Adjustment ColorTint Video Input Noise reductionProgressive Video Input Screen Size Adjustment Setting SettingSetting Menu Language Auto setupKeystone Blue backDisplay Logo Logo and Logo PIN code lock settings Logo select CaptureLogo select CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Logo PIN code lockCeiling RearTerminal Input searchPower management Standby modePower management To change the code for the remote control PointerOn start Lamp controlSecurity Key lock and PIN code lock settings Key lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN codeChange the PIN code Fan FanFan control Lamp counterFactory default Factory defaultFilter counter Maintenance and Cleaning Then check the matters belowTop Control Maintenance and Cleaning Cleaning the Filter Resetting the Filter CounterMaintenance and Cleaning Lamp Replacement Reset the lamp counterService Parts No 332 Lamp Handling Precautions Maintenance and Cleaning Resetting the Lamp CounterMaintenance and Cleaning Attaching the Lens Cover Cleaning the Projection LensCleaning the Projector Cabinet Indicators and Projector Condition AppendixAppendix Troubleshooting No powerAppendix PIN code dialog box appears at start-upAppendix Menu Tree Computer Input/Video InputVideo Input Setting Appendix Compatible Computer Specifications ON-SCREEN Resolution31.47 59.94 Appendix Technical Specifications Accessories Optional PartsAppendix PJ Link Notice Appendix Configurations of Terminals USB Connector Series aUSB Connector Series B Terminal Analog RGB Mini D-sub 15 pinAppendix PIN Code Number Memo Logo PIN Code Lock NoKW6AC