Sanyo PLC-SU51 Basic Operation, Turning On the Projector, Enter a PIN code, What is PIN code?

Page 20

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR,

 

etc.) before turning on the projector.

2

Connect the projector's AC power cord into an AC outlet.

 

The POWER indicator blinks red in a moment and lights red.

3

Press the POWER ON-OFF button on the top control or on

 

the remote control. The POWER indicator turns green

 

lighting and the cooling fans start to operate. The

 

preparation display appears on the screen and the count

 

down starts.

4

After the count-down, the input source that was selected

 

last and the Lamp mode status icon (see page 45) appear on

the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Select a number by pressing the Point 7 8 button and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can start to operate the projector.

If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to PIN Code Lock function in Setting on page 47 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, write it down in column on page 63 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

16

The preparation display disappears after 20 seconds.

Selected Input Source and Lamp Mode

Lamp mode

(See page 45 for Lamp mode.)

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandMoving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communication Commission NoticeBack Bottom Part Names and FunctionsFront Rear Terminal Part Names and FunctionsTop Control Remote Control @1 !3Laser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangePart Names FunctionsRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImagePositioning the Projector InstallationAdjustable Feet Connecting the AC Power Cord 200 240 V ACConnecting to a Computer InstallationConnecting to Video Equipment External Audio Equipment Video cable Video and audio cableConnecting to Component Video Equipment Cable StereoWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector Basic OperationHow to Operate the On-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar Basic OperationZoom and Focus Adjustment Auto Setup FunctionKeystone Adjustment Picture Freeze FunctionNo Show Function BasicTimer Function Sound AdjustmentVolume MuteComputer Input Computer InputInput Source Selection Computer System Selection AutoMode PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoVideo Input Input button Video Computer Video buttonInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentImage button Dynamic Standard Cinema BlackboardGreen CinemaImage1~4 Color TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingAuto Setup LanguageSetting Logo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockTo Change the PIN Code To Change the PIN Code Lock settingPIN code lock Lamp counter reset Factory defaultFan Factory default FanMaintenance and Cleaning CleaningProjector is shut down and the Warning indicator lights red Then check the matters belowCleaning the Air Filters Attaching the Lens CoverMaintenance & Cleaning Cleaning the Projection LensCleaning the Projector Cabinet Lamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control does not work AppendixComputer 2 cannot be selected Terminal item cannot be selectedMenu Tree System Setting Image SelectIndicators and Projector Condition Projector ConditionKHz Compatible Computer SpecificationsFreq Technical Specifications Accessories Optional PartsThis cable is used for RGB Scart 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal Analog RGB Mini D-sub 15 pin Terminal DVI-ILogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Part No 314 6645 1AA6P1P4532-- MT7A

PLC-SU51, PLC-XU58, PLC-XU51 specifications

Sanyo has made significant strides in the field of projectors, and models like the PLC-XU51, PLC-XU58, and PLC-SU51 showcase the company’s commitment to quality and performance in diverse presentation environments. These models are designed to meet the needs of both educational and business settings, providing reliable, high-quality projection capabilities.

The Sanyo PLC-XU51 is known for its solid performance, offering XGA resolution of 1024 x 768 pixels, which ensures clear and detailed visuals. With a brightness of 3000 lumens, this projector excels in both dim and well-lit rooms, making it a versatile choice for different scenarios. The projector employs a 3LCD technology that enhances color accuracy and delivers vivid images, minimizing the rainbow effect often associated with single-chip DLP projectors. Additionally, the PLC-XU51 features a contrast ratio of 500:1, which allows for deep blacks and bright highlights, ensuring that presentations stand out.

Similarly, the PLC-XU58 builds on the strengths of the XU51 but offers even higher brightness at 4000 lumens, making it suitable for larger venues or spaces with significant ambient light. This model maintains the same XGA resolution, but the enhanced brightness ensures that images remain vibrant and clear, regardless of the lighting conditions. The PLC-XU58 also integrates advanced features like an automatic vertical keystone correction, which simplifies setup and alignment, ensuring that presentations appear straight and accurate.

The Sanyo PLC-SU51 diverges slightly with its enhanced SXGA+ resolution of 1400 x 1050 pixels, making it ideal for high-definition presentations. This projector is particularly advantageous for users requiring finer detail in their visuals, such as architects or graphic designers. The PLC-SU51 also boasts a brightness of 3000 lumens, complemented by a 600:1 contrast ratio, offering impressive image quality even in challenging lighting situations.

All three models come equipped with a variety of connectivity options, including HDMI, VGA, and audio inputs, allowing seamless integration with a range of devices. Furthermore, they feature a built-in speaker and remote control, enhancing user experience during presentations. The compact design and light weight of these projectors make them portable and easy to set up in various environments.

In summary, the Sanyo PLC-XU51, XU58, and SU51 projectors represent a blend of high performance, flexibility, and ease of use. Their advanced technologies, such as 3LCD for enhanced color reproduction, and high brightness levels, make them a reliable choice for educators and business professionals alike, ensuring that every presentation is delivered with clarity and impact.
Top Page Image Contents