Sanyo PLC-SU51, PLC-XU58 Lamp Replace Counter, When the lamp replace counter is reset, the Lamp

Page 53

Maintenance and Cleaning

Lamp Replace Counter

Be sure to reset the lamp replace counter after the lamp is replaced. REPLACE indicator stops lighting.

1

Turn the projector on, press the MENU button and the On-

 

Screen Menu will appear. Press the Point 7 8 button to

 

move the red frame pointer to the Setting Menu icon.

2

Press the Point d button to move the red frame pointer to

 

the Lamp counter reset item and then press the SELECT

 

button. The message "Lamp replace counter Reset?" is

 

displayed. Move the pointer to [Yes] and then press the

 

SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

 

reset the Lamp replace counter.

✔Note:

Do not reset the Lamp replace counter without implementation of lamp replacement. Be sure to reset the Lamp replace counter only after replacing the lamp.

When the lamp replace counter is reset, the LAMP

Move the pointer to Lamp counter reset and then press the SELECT button. The message “Lamp replace counter Reset?” is displayed.

Maintenance & Cleaning

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Model PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communication Commission Notice ComplianceBack Bottom Part Names and FunctionsFront Part Names and Functions Rear TerminalTop Control @1 !3 Remote ControlPointer Function Laser Pointer FunctionOperating Range Wireless Mouse OperationPart Names FunctionsRemote Control Battery Installation Remote Control CodeButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImagePositioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordInstallation Connecting to a ComputerExternal Audio Equipment Video cable Video and audio cable Connecting to Video EquipmentCable Stereo Connecting to Component Video EquipmentBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeBasic Operation Turning Off the ProjectorRemote Control How to Operate the On-Screen MenuOn-Screen Menu Top ControlBasic Operation Menu BarAuto Setup Function Zoom and Focus AdjustmentPicture Freeze Function Keystone AdjustmentNo Show Function BasicSound Adjustment Timer FunctionVolume MuteComputer Input Computer InputInput Source Selection Auto Computer System SelectionMode PC System MenuPC Adjust Menu Auto PC AdjustmentTo store adjustment parameters Auto PC AdjManual PC Adjustment Mode free ResetDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputVideo Input Input button Video Computer Video buttonInput button Computer Video Computer button Input Source Selection Component, RGB Scart 21-PinAuto Video System SelectionAV System Menu Video or S-Video AV System Menu ComponentImage button Dynamic Standard Cinema BlackboardGreen CinemaImage1~4 Tint ColorFilm ProgressiveProvides image at a normal video aspect ratio of 4 Setting SettingAuto Setup LanguageSetting Capture LogoCeiling RearPower management Standby modeLamp mode On startPointer Remote controlUSB Key lockTo Change the PIN Code To Change the PIN Code Lock settingPIN code lock Factory default Lamp counter resetFan Factory default FanCleaning Maintenance and CleaningProjector is shut down and the Warning indicator lights red Then check the matters belowAttaching the Lens Cover Cleaning the Air FiltersMaintenance & Cleaning Cleaning the Projection LensCleaning the Projector Cabinet Reset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Remote Control does not workComputer 2 cannot be selected Terminal item cannot be selectedMenu Tree Image Select System SettingProjector Condition Indicators and Projector ConditionKHz Compatible Computer SpecificationsFreq Technical Specifications Optional Parts AccessoriesThis cable is used for RGB Scart 21-Pin Video output of video equipmentUSB Connector Series B Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Terminal DVI-ILogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Part No 314 6645 1AA6P1P4532-- MT7A

PLC-SU51, PLC-XU58, PLC-XU51 specifications

Sanyo has made significant strides in the field of projectors, and models like the PLC-XU51, PLC-XU58, and PLC-SU51 showcase the company’s commitment to quality and performance in diverse presentation environments. These models are designed to meet the needs of both educational and business settings, providing reliable, high-quality projection capabilities.

The Sanyo PLC-XU51 is known for its solid performance, offering XGA resolution of 1024 x 768 pixels, which ensures clear and detailed visuals. With a brightness of 3000 lumens, this projector excels in both dim and well-lit rooms, making it a versatile choice for different scenarios. The projector employs a 3LCD technology that enhances color accuracy and delivers vivid images, minimizing the rainbow effect often associated with single-chip DLP projectors. Additionally, the PLC-XU51 features a contrast ratio of 500:1, which allows for deep blacks and bright highlights, ensuring that presentations stand out.

Similarly, the PLC-XU58 builds on the strengths of the XU51 but offers even higher brightness at 4000 lumens, making it suitable for larger venues or spaces with significant ambient light. This model maintains the same XGA resolution, but the enhanced brightness ensures that images remain vibrant and clear, regardless of the lighting conditions. The PLC-XU58 also integrates advanced features like an automatic vertical keystone correction, which simplifies setup and alignment, ensuring that presentations appear straight and accurate.

The Sanyo PLC-SU51 diverges slightly with its enhanced SXGA+ resolution of 1400 x 1050 pixels, making it ideal for high-definition presentations. This projector is particularly advantageous for users requiring finer detail in their visuals, such as architects or graphic designers. The PLC-SU51 also boasts a brightness of 3000 lumens, complemented by a 600:1 contrast ratio, offering impressive image quality even in challenging lighting situations.

All three models come equipped with a variety of connectivity options, including HDMI, VGA, and audio inputs, allowing seamless integration with a range of devices. Furthermore, they feature a built-in speaker and remote control, enhancing user experience during presentations. The compact design and light weight of these projectors make them portable and easy to set up in various environments.

In summary, the Sanyo PLC-XU51, XU58, and SU51 projectors represent a blend of high performance, flexibility, and ease of use. Their advanced technologies, such as 3LCD for enhanced color reproduction, and high brightness levels, make them a reliable choice for educators and business professionals alike, ensuring that every presentation is delivered with clarity and impact.
Top Page Image Contents